HPE Proliant ML110 Gen11 Server
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
Processor
1 x 4th or 5th Gen Intel® Xeon® Scalable processor, 8 to 32 cores depending on processor, up to 3.2 GHz, up to 60 MB L3 cache
Memory
DDR5 RDIMM: up to 16 x HPE DDR5 Smart Memory DIMMs (1.5 TB), speeds up to 5600 MT/s depending on processor and population
Storage controllers
- Embedded Intel® VROC SATA/NVMe
- Optional HPE Smart Array storage controllers depending on configuration
Drive bays
Front drive support
- Up to 4 to 8 x LFF SAS/SATA drives
- Up to 8 to 16 x SFF SAS/SATA HDD/SSD
Power supplies
- 500 W Flex Slot Platinum
- 800 W Flex Slot Platinum
- 1000 W Flex Slot Titanium
- 1600 W Flex Slot Titanium
Cooling and fans
Standard 2 non-hot-plug fans; optional 2 additional fans for N+1 redundancy depending on model
Dimensions
- Height: 462 mm (18.19 inches)
- Width: 195 mm (7.68 inches)
- Depth: 587 mm (23.1 inches)
- Weight: up to 33.2 kg (73.19 lb)
Form factor
4.5U tower server; optional 5.5U rack conversion kit
Embedded management
- HPE iLO 6 Standard with Intelligent Provisioning
- HPE OneView Standard
- HPE iLO Advanced, optional
- HPE OneView Advanced, optional
- HPE Compute Ops Management
- Redfish API support
Security
- UEFI Secure Boot and Secure Start
- Immutable Silicon Root of Trust
- Intel® Software Guard Extensions (SGX), where supported
- TPM 2.0 support
- IDevID certificates installed by default
- Secure Recovery and Runtime Firmware Verification with HPE iLO Advanced Premium Security Edition
- Optional Trusted Supply Chain, iLO security modes, chassis intrusion detection and bezel locking kits
Networking
- Embedded 2 x 1GbE BCM5720 network ports
- Choice of OCP or PCIe stand-up network adapters
- Dedicated 1GbE iLO Management Port
Ports
Front ports
- 1 x Front iLO Service Port
- 1 x USB 3.2 Gen1
- 1 x DisplayPort
Internal ports
- 1 x USB 3.2 Gen1
- 1 x USB 2.0
Rear ports
- 1 x dedicated 1GbE iLO Management Port
- 2 x USB 3.2 Gen1
- 1 x VGA
- 1 x Serial port, optional
PCIe expansion
Up to 4 x PCIe Gen5 x16 slots and 1 x OCP 3.0 x16 slot
Optical drive
Optional DVD-ROM or DVD-RW optical drive; optional Half-Height RDX
Operating systems and virtualization
- Microsoft Windows Server 2019, 2022, 2025
- VMware ESXi 7.0 U3; VMware ESXi 8.0, 8.0 U1, 8.0 U2, 8.0 U3; VMware ESX 9.0, 9.1
- Red Hat Enterprise Linux 8.6, 9.0, 10.0; 5th Gen Intel® Xeon® Scalable configurations require RHEL 8.8 or RHEL 9.2 minimum
- SUSE Linux Enterprise Server 15 SP4; SLES 16 and SLES 15 SP5 QU1 for 5th Gen Intel® Xeon® Scalable configurations
- SUSE Linux Enterprise Micro 5.3; SUSE Linux Micro 6.2 and SLE Micro 5.5 for 5th Gen Intel® Xeon® Scalable configurations
- Canonical Ubuntu 22.04 LTS, 24.04 LTS
- Oracle Linux 9.0 for 4th Gen Intel® Xeon® Scalable; Oracle Linux 9.3 for 5th Gen Intel® Xeon® Scalable
HPE ProLiant ML110 Gen11 overview
HPE ProLiant ML110 Gen11 is a 4.5U, single-socket tower server with optional rack conversion for SMB, remote office and branch office workloads that need compute performance, storage flexibility, expandability and PCIe Gen5 support. It is based on 4th or 5th Generation Intel Xeon Scalable processors, HPE DDR5 Smart Memory and HPE iLO 6 management.
The server is suitable for business applications, file and print services, small virtualization, backup infrastructure, security monitoring, branch services, light databases, internal LTO workflows and selected GPU workloads. Compared with previous ML110 generations, Gen11 brings DDR5, PCIe Gen5, NS204i-u boot options and improved storage flexibility.
When to choose HPE ProLiant ML110 Gen11
Choose HPE ProLiant ML110 Gen11 when the workload needs a tower server with enterprise management, single-socket economics and room for local storage. Compared with HPE ProLiant ML30 Gen11, it gives more processor scale, memory capacity, drive expansion, PCIe Gen5 expansion and GPU flexibility, while remaining smaller and simpler than HPE ProLiant ML350 Gen11.
Validate processor generation, memory population, drive cages, storage controller, OCP/NIC cards, risers, power supplies, redundant fan kit, GPU and rack conversion before ordering. This is especially important for 16SFF, 8LFF, NS204i-u, internal LTO, high-speed networking and GPU configurations.
Chassis and drive bay options
HPE ProLiant ML110 Gen11 supports several chassis and drive bay layouts for tower deployments. The right option depends on whether the server is being configured for local business services, small virtualization, backup, capacity storage, internal tape or light accelerator workloads.
| Chassis option | Best for | Comment |
|---|---|---|
| HPE ML110 Gen11 8SFF | SSD-based business applications and small virtualization | Supports 8 SFF SAS/SATA drives and can expand to 16 SFF with an additional cage in supported builds. |
| HPE ML110 Gen11 4LFF | Capacity storage, backup and file services | Starts with 4 LFF drives and can support an additional LFF or SFF cage depending on chassis and controller. |
| HPE ML110 Gen11 8LFF expanded configurations | Local backup repositories and archive data | Selected LFF builds can support up to 8 LFF drives; mixed SFF/LFF cages are supported with LFF chassis. |
| HPE ML110 Gen11 internal LTO configurations | Local tape backup and branch data protection | Internal LTO support is available in selected layouts and must be planned with drive cages and controller choice. |
| HPE ML110 Gen11 GPU-capable configurations | Light GPU acceleration, VDI graphics and edge analytics | Selected NVIDIA L4 or RTX options require correct riser, fan, power and cooling validation. |
For capacity workloads, LFF configurations are usually the practical starting point. For faster application response or small virtualization datastores, SFF SSD layouts should be considered. NS204i-u and onboard M.2 options can separate boot from data drives.
Final drive compatibility depends on the selected chassis, backplane or drive cage, storage controller, cabling, risers, cooling, power supplies and the HPE support matrix.
Recommended configurations by workload
| Workload | Recommended focus |
|---|---|
| Branch office / SMB services | Balanced CPU, RAM, local storage and remote management through HPE iLO. |
| File / print / POS | Protected local storage, embedded networking and simple serviceability. |
| Security monitoring | Capacity storage, network bandwidth for camera streams and enough CPU/RAM for recording software. |
| Databases / data management | CPU choice aligned with licensing, enough RAM for cache, low-latency SSD/NVMe and protected storage. |
| Backup / archive | Capacity-oriented chassis, HDDs, moderate CPU/RAM and network throughput sized for backup windows. |
| Software-defined storage / HCI | Drive layout, HBA/JBOD or controller mode, cache strategy and redundant networking. |
| Mixed enterprise workloads | Balanced CPU, RAM, storage and NIC choices with headroom for maintenance and growth. |
How to choose CPU, RAM, RAID and storage
ML110 Gen11 supports one 4th or 5th Generation Intel Xeon Scalable processor. More cores help small virtualization and consolidation; higher frequency helps business applications and databases.
DDR5 speed and capacity depend on CPU generation and population rules. The platform has 16 DIMM slots, 8 memory channels and up to 1.5 TB in supported 5th Gen configurations with 96 GB RDIMMs.
Intel VROC SATA/NVMe can be useful for selected boot and storage layouts, but OS and driver support must be checked. Hardware RAID is preferred when SAS or advanced RAID features are required.
LFF HDDs suit backup and file capacity. SFF SSDs suit application response and small virtualization. NS204i-u, onboard M.2 and internal LTO should be planned with controllers, fans and drive cages.
HPE ProLiant ML110 Gen11 vs related HPE models
| Model | When to consider |
|---|---|
| HPE ProLiant ML30 Gen11 | Choose ML30 Gen11 for lower-cost entry tower SMB and POS workloads. |
| HPE ProLiant ML350 Gen11 | Choose ML350 Gen11 when dual-socket tower scale and more expansion are required. |
| HPE ProLiant DL320 Gen11 | Choose DL320 Gen11 when a compact 1U rack server is preferred. |
| HPE Gen11 Servers | Consider the wider Gen11 portfolio for rack density, AMD EPYC or specialized layouts. |
| HPE MicroServer Gen10 Plus | Consider MicroServer Gen10 Plus when a smaller platform is enough. |
Summary: is HPE ProLiant ML110 Gen11 the right server for your workload×
HPE ProLiant ML110 Gen11 is a strong single-socket tower server for SMB, ROBO, business applications, file services, backup, light virtualization, security monitoring and selected GPU workloads. Choose it for Intel Xeon Scalable performance, DDR5, PCIe Gen5, 8SFF or 4LFF storage, optional LTO and HPE management. Consider HPE ProLiant ML30 Gen11 for entry tower needs, HPE ProLiant ML350 Gen11 for dual-socket tower scale or HPE ProLiant DL320 Gen11 for compact rack deployment.
Die Servermall-Garantie umfasst:
- Rund um die Uhr (auch an Feiertagen) erreichbarer Servermall-Kundenservice und -Support zur Behebung von Problemen mit generalüberholten Servern und zugehörigen Produkten sowie ausgewählten Softwareproblemen.
- 5 Jahre Garantie. Im Falle einer Problemdiagnose oder Reparatur führen wir diese kostenlos am Installationsort des Servers durch.
- Vor-Ort-Versand von Ersatzteilen an den Installationsort oder einen anderen von Servermall genehmigten und gemeinsam vereinbarten Geschäftsstandort des Kunden zur Behebung eines Produktproblems.
Abonnieren Sie unsere News und erhalten Sie 50 € Rabatt auf den Server.
Kostenloser Versand innerhalb der EU bei Bestellungen von Ausrüstung ab 500 €. Lieferung innerhalb von 4 Werktagen.
einen Server bei Servermall zu kaufen
Garantie
Wir möchten sicherstellen, dass unsere Geräte für Sie absolut zuverlässig sind. Deshalb werden alle unsere Geräte (auch neue) umfassend diagnostiziert, getestet und Teile ausgetauscht.
Tests
Wir statten unsere Geräte mit verschiedenen Dienstprogrammen und Software aus. Sie werden garantiert lange funktionieren.
Stromversorgung
Die Komponenten arbeiten mit voller Leistung und werden mehrere Tage lang getestet. Bei Zweifeln tauschen wir sie aus.
aller Geräte
Unsere Vorschriften sehen die gleichen Prüfungen für gebrauchte und neue Geräte vor. Übrigens: Wir ergänzen die offizielle Herstellergarantie durch unsere eigene Garantie.