HPE ProLiant ML110 Gen11 4LFF
You might be interested in
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
Processor
1 x 4th or 5th Gen Intel® Xeon® Scalable processor, 8 to 32 cores depending on processor, up to 3.2 GHz, up to 60 MB L3 cache
Memory
DDR5 RDIMM: up to 16 x HPE DDR5 Smart Memory DIMMs (1.5 TB), speeds up to 5600 MT/s depending on processor and population
Storage controllers
- Embedded Intel® VROC SATA/NVMe
- Optional HPE Smart Array storage controllers depending on configuration
Drive bays
Front drive support
- Up to 4 to 8 x LFF SAS/SATA drives
- Up to 8 to 16 x SFF SAS/SATA HDD/SSD
Power supplies
- 500 W Flex Slot Platinum
- 800 W Flex Slot Platinum
- 1000 W Flex Slot Titanium
- 1600 W Flex Slot Titanium
Cooling and fans
Standard 2 non-hot-plug fans; optional 2 additional fans for N+1 redundancy depending on model
Dimensions
- Height: 462 mm (18.19 inches)
- Width: 195 mm (7.68 inches)
- Depth: 587 mm (23.1 inches)
- Weight: up to 33.2 kg (73.19 lb)
Form factor
4.5U tower server; optional 5.5U rack conversion kit
Embedded management
- HPE iLO 6 Standard with Intelligent Provisioning
- HPE OneView Standard
- HPE iLO Advanced, optional
- HPE OneView Advanced, optional
- HPE Compute Ops Management
- Redfish API support
Security
- UEFI Secure Boot and Secure Start
- Immutable Silicon Root of Trust
- Intel® Software Guard Extensions (SGX), where supported
- TPM 2.0 support
- IDevID certificates installed by default
- Secure Recovery and Runtime Firmware Verification with HPE iLO Advanced Premium Security Edition
- Optional Trusted Supply Chain, iLO security modes, chassis intrusion detection and bezel locking kits
Networking
- Embedded 2 x 1GbE BCM5720 network ports
- Choice of OCP or PCIe stand-up network adapters
- Dedicated 1GbE iLO Management Port
Ports
Front ports
- 1 x Front iLO Service Port
- 1 x USB 3.2 Gen1
- 1 x DisplayPort
Internal ports
- 1 x USB 3.2 Gen1
- 1 x USB 2.0
Rear ports
- 1 x dedicated 1GbE iLO Management Port
- 2 x USB 3.2 Gen1
- 1 x VGA
- 1 x Serial port, optional
PCIe expansion
Up to 4 x PCIe Gen5 x16 slots and 1 x OCP 3.0 x16 slot
Optical drive
Optional DVD-ROM or DVD-RW optical drive; optional Half-Height RDX
Operating systems and virtualization
- Microsoft Windows Server 2019, 2022, 2025
- VMware ESXi 7.0 U3; VMware ESXi 8.0, 8.0 U1, 8.0 U2, 8.0 U3; VMware ESX 9.0, 9.1
- Red Hat Enterprise Linux 8.6, 9.0, 10.0; 5th Gen Intel® Xeon® Scalable configurations require RHEL 8.8 or RHEL 9.2 minimum
- SUSE Linux Enterprise Server 15 SP4; SLES 16 and SLES 15 SP5 QU1 for 5th Gen Intel® Xeon® Scalable configurations
- SUSE Linux Enterprise Micro 5.3; SUSE Linux Micro 6.2 and SLE Micro 5.5 for 5th Gen Intel® Xeon® Scalable configurations
- Canonical Ubuntu 22.04 LTS, 24.04 LTS
- Oracle Linux 9.0 for 4th Gen Intel® Xeon® Scalable; Oracle Linux 9.3 for 5th Gen Intel® Xeon® Scalable
- Condition
- New
- Manufacturer
- HPE
- Form factor
- Tower
- Remote-Control-Modul
- iLO 6 ASIC
- Supported CPU
- 1 x 4th or 5th Intel Xeon Scalable
- Supported RAM
- DDR5 DIMM 16 slots (4096 GB)
- Power supply unit
- Power supply HP 1000w
- RAID controller
- RAID Embedded 8 SATA
- HDD bays
- noHDD (up to Array HDD 3.5'' LFF)
Need a technical consultation on choosing a server?
Submit a requestHPE ProLiant ML110 Gen11 4LFF is a storage configuration with four front 3.5-inch LFF bays available in hot-plug and non-hot-plug configurations for a 4.5U single-socket tower platform with rack conversion capability. It is designed for SMB, ROBO, retail, and office deployments that need enterprise storage without a dedicated rack environment.
Key features:
-
4 front LFF bays: Four 3.5-inch bays provide economical local capacity. HPE offers distinct hot-plug and non-hot-plug versions, so the service method must be matched to the selected chassis.
-
Hot-plug or non-hot-plug storage: The hot-plug 4LFF model supports validated SAS and SATA HDD/SSD media. The non-hot-plug version uses cabled SATA drives and must not be described as hot-swap.
-
Embedded and hardware RAID choices: Non-hot-plug SATA models use the embedded Intel VROC SATA path. Hot-plug SAS/SATA configurations can use supported HPE storage controllers for hardware RAID, cache, and enterprise drive management.
-
Second 4LFF cage option: A second matching 4LFF cage can raise the system total to eight LFF drives. Mixing with an SFF cage is supported only on the hot-plug LFF chassis and must follow the ML110 configuration rules.
-
Rack-convertible enterprise tower: Fourth- and fifth-generation Intel Xeon Scalable processors, DDR5 memory, PCIe Gen5, HPE iLO 6, and optional rack conversion support distributed business and departmental infrastructure.
Use cases:
-
Branch-office services: Suitable for local identity, file, print, security, backup, and application services in remote or space-constrained offices.
-
File and shared storage: Provides local capacity for departmental data, shared business files, collaboration content, and internal repositories.
-
Backup and archive: Capacity-oriented LFF configurations are well suited to backup targets, retention pools, nearline data, and archive workflows.
-
Business applications: Provides a practical storage foundation for line-of-business software, directory services, security tools, and internal platforms.
HPE ProLiant ML110 Gen11 4LFF is a rack-convertible tower storage configuration for businesses that need dependable LFF capacity and a documented path for future expansion.
to Buy a Server
from Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.