HPE ProLiant ML30 Gen11 4LFF
Free shipping on orders over £500 in the EU, £500 in the UK, and $3,000 in the USA
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
Processor
1 x Intel® Xeon® E-2400 Series or current Intel® Xeon® 6300 series processor, 4 to 8 cores depending on processor, up to 3.6 GHz, up to 16 MB Intel® Smart Cache
Memory
DDR5 UDIMM: up to 4 x HPE DDR5 Standard Memory DIMMs (128 GB), unbuffered ECC, speeds up to 4400 MT/s with supported processors
Storage controllers
- Embedded Intel® VROC SATA Hybrid RAID
- HPE Smart Array Essentials and Performance controllers, depending on configuration
Drive bays
Front drive support
- Up to 4 x LFF non-hot-plug SATA HDD
- Up to 4 x LFF hot-plug SAS/SATA HDD/SSD
- Up to 8 x SFF hot-plug SAS/SATA HDD/SSD
Power supplies
- 350 W ATX non-redundant
- 500 W Flex Slot redundant
- 800 W Flex Slot redundant
- 1000 W Flex Slot redundant
Cooling and fans
Air cooling; front PCI fan and baffle kit required for selected hot-plug and PCIe configurations
Dimensions
- Height: 368.3 mm (14.50 inches)
- Width: 175.3 mm (6.90 inches)
- Depth: 475.0 mm (18.70 inches)
- Weight: up to 18.7 kg (41.2 lb)
Form factor
4U tower server
Embedded management
- HPE iLO 6 Standard with Intelligent Provisioning
- HPE OneView Standard
- HPE iLO Advanced, optional
- HPE OneView Advanced, optional
- HPE Compute Ops Management
- Redfish API support
Security
- UEFI Secure Boot and Secure Start
- Immutable Silicon Root of Trust
- Intel® Software Guard Extensions (SGX), where supported
- TPM 2.0 support
- IDevID certificates installed by default
- Secure Recovery and Runtime Firmware Verification with HPE iLO Advanced Premium Security Edition
- Optional Trusted Supply Chain, iLO security modes, chassis intrusion detection and bezel locking kits
Networking
- Embedded 4 x 1GbE Broadcom BCM5719 network adapter
- Optional HPE network controllers
- Optional dedicated iLO Management Port
Ports
Front ports
- 2 x USB Type-A ports: 1 x USB 3.2 Gen1, 1 x USB 2.0 iLO service port
Internal ports
- 2 x USB 3.2 Gen2
Rear ports
- 4 x USB 3.2 Gen1 Type-A
- 4 x 1GbE RJ-45
- 1 x VGA
- 1 x DisplayPort
- 1 x Serial port, optional
- 1 x dedicated iLO Management Port, optional
PCIe expansion
Up to 4 expansion slots, including 1 x PCIe Gen5 x16 slot
Optical drive
Optional SATA 9.5 mm DVD-ROM or DVD-RW optical drive
Operating systems and virtualization
- Microsoft Windows Server 2019, 2022, 2025
- VMware ESXi 8.0 U2, 8.0 U3; VMware ESX 9.0, 9.1
- Red Hat Enterprise Linux 8.8, 9.2, 10.0; Intel® Xeon® 6300 configurations require RHEL 8.10 or RHEL 9.4 minimum
- SUSE Linux Enterprise Server 15 SP4; SLES 16 and SLES 15 SP6 for Intel® Xeon® 6300 configurations
- SUSE Linux Enterprise Micro 5.3; SUSE Linux Micro 6.2 for Intel® Xeon® 6300 configurations
- Canonical Ubuntu 20.04.5 LTS, 22.04 LTS, 24.04 LTS; Intel® Xeon® 6300 configurations require Ubuntu 22.04 LTS minimum
- Condition
- New
- Manufacturer
- HPE
- Form factor
- Tower
- Remote-Control-Modul
- iLO 6
- Supported CPU
- 1 x Intel Xeon E-2400
- Supported RAM
- DDR5 DIMM 4 slots (128 GB)
- Power supply unit
- Power supply HP 800w
- RAID controller
- RAID Embedded Intel VROC SATA SW
- HDD bays
- noHDD (up to Array HDD 3.5'' LFF)
Need a technical consultation on choosing a server?
Submit a requestHPE ProLiant ML30 Gen11 4LFF is a storage configuration with four front 3.5-inch LFF bays available in hot-plug and non-hot-plug configurations for a compact 4U single-socket tower platform. It is designed for SMB, ROBO, retail, and office deployments that need enterprise storage without a dedicated rack environment.
Key features:
-
4 front LFF bays: Four 3.5-inch bays provide economical local capacity. HPE offers distinct hot-plug and non-hot-plug versions, so the service method must be matched to the selected chassis.
-
Hot-plug or non-hot-plug storage: The hot-plug 4LFF model supports validated SAS and SATA HDD/SSD media. The non-hot-plug version uses cabled SATA drives and must not be described as hot-swap.
-
Embedded and hardware RAID choices: Non-hot-plug SATA models use the embedded Intel VROC SATA path. Hot-plug SAS/SATA configurations can use supported HPE storage controllers for hardware RAID, cache, and enterprise drive management.
-
Defined four-drive tower layout: The ML30 Gen11 4LFF chassis provides four drive positions and does not rely on additional front data cages. Optional optical and M.2 boot devices remain separate from the LFF basket.
-
Compact business tower platform: Intel Xeon 6300 series, Xeon E, or Pentium processor options, DDR5 memory, PCIe Gen5, and HPE iLO 6 provide practical enterprise features for offices and branch locations.
Use cases:
-
Branch-office services: Suitable for local identity, file, print, security, backup, and application services in remote or space-constrained offices.
-
File and shared storage: Provides local capacity for departmental data, shared business files, collaboration content, and internal repositories.
-
Backup and archive: Capacity-oriented LFF configurations are well suited to backup targets, retention pools, nearline data, and archive workflows.
-
Business applications: Provides a practical storage foundation for line-of-business software, directory services, security tools, and internal platforms.
HPE ProLiant ML30 Gen11 4LFF is a rack-convertible tower storage configuration for businesses that need dependable LFF capacity and a documented path for future expansion.
Free shipping on orders over £500 in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over £500 in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over £500 in the EU, £500 in the UK, and $3,000 in the USA
to Buy a Server
from Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.