Server Supermicro 5019S-M
- Processor
- Single Socket H4 (LGA 1151) supports: Intel® Xeon® E3-1200 v6/v5, Intel® Core™ i3 7th/6th Gen CPU TDP up to 80W
- Memory Capacity
- 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC UDIMM Memory type: 2400/2133/1866/1600 MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMM modules DIMM module sizes 16GB, 8GB, 4GB Memory voltage 1.2V Corrects single-bit errors Detects double-bit errors (using ECC memory)
- Chipset
- Intel® C236
- I/O Ports
- 8 SATA3 ports (6 Gb/s) 2 RJ45 Gigabit Ethernet LAN ports 1 dedicated IPMI LAN RJ45 port 5 USB 3.0 ports (2 rear + 2 headers + 1 type A) 6 USB 2.0 ports (2 rear + 4 headers) 1 VGA port 2 COM ports (1 rear, 1 front) 2 SuperDOM (Disk on Module) ports with built-in power
- Chassis
- 1U Form Factor Model CSE-813MFTQC-350CB
- Dimensions and Weight
- Height 1.7 inches (43 mm) x Width 17.2 inches (437 mm) x Depth 19.85 inches (503 mm) Gross weight: 30.4 lbs (13.8 kg) Net weight: 17.6 lbs (8 kg)
- Expansion Slots
- PCI-Express: 1 PCI-E 3.0 x8 (in x16) AOC slot M.2 interface: 1 M.2 interface: PCI-E 3.0 x2 Form factor Form factor: 2280 Key: M-Key Double Height Connector
- Drive Bays
- 4 hot-swap 3.5-inch SATA3 drive bays optionally 2 fixed internal 2.5-inch drives
- Power Supply
- 350W AC Platinum power supply with PFC
- Environmental Specifications
- Operating temperature: 10°C ~ 35°C Non-operating temperature: -40°C to 70°C (-40°F to 158°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- Fans
- 4x 40x28 mm 4-pin PWM cooling fans Additional 1x 40x28 mm PWM fan
- Network Controllers
- 2 Intel® I210-AT Gigabit Ethernet LAN Supports 10BASE-T, 100BASE-TX and 1000BASE-T, RJ45 output
- IPMI
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
- RAID
- SATA3 (6 Gb/s) via C236 controller RAID 0, 1, 5, 10 support
- Video
- ASPEED AST2400 BMC
- Backplane
- SAS/SATA hard drive backplane
- Motherboard
- Super X11SSH-F
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.