- Servermall
- /
- Servers
- /
- Supermicro 5019S-ML
- /
Supermicro 5019S-ML
- Condition
- New
- Manufacturer
- Supermicro
- Form factor
- 1U
- Supported CPU
- 1 x Intel Xeon E3 v5/v6
- Supported RAM
- DDR4 DIMM 4 slots (64 GB)
- Processor
- Single Socket H4 (LGA 1151) supports: Intel® Xeon® E3-1200 v6/v5, Intel® Core™ i3 7th/6th Gen CPU TDP up to 80W
- Memory Capacity
- 4x 288-pin DDR4 DIMM slots Up to 64GB DDR4 ECC UDIMM Memory type: 2400/2133/1866/1600 MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMM modules DIMM module sizes: 16GB, 8GB, 4GB
- Chipset
- Intel® C236
- I/O Ports
- 8 SATA3 ports (6 Gb/s) 2 RJ45 Gigabit Ethernet LAN ports 1 dedicated IPMI LAN RJ45 port 5 USB 3.0 ports (2 rear + 2 headers + 1 type A) 6 USB 2.0 ports (2 rear + 4 headers) 1 VGA port 2 COM ports (1 rear, 1 header) 2 SuperDOM (Disk on Module) ports with built-in power
- Chassis
- 1U rackmount Model CSE-512F-350B1
- Dimensions and Weight
- Height 9.45 inches (240 mm) x Width 8.27 inches (210 mm) x Depth 14.4 inches (366 mm) Gross weight: 16 lbs (7.3 kg) Net weight: 10.5 lbs (4.8 kg)
- Expansion Slots
- PCI-Express: 1 PCI-E 3.0 x8 (in x16 slot) M.2 M.2 interface: 1 M.2 interface: PCI-E 3.0 x2 M.2 form factor: 2280 M.2 Key: M-Key
- Drive Bays
- 2x 3.5" or 3x 2.5" (option) internal drive bays
- Power Supply
- 350W AC power supply with PFC Platinum
- Environmental Specifications
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 70°C (-40°F to 158°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- Motherboard
- Super X11SSH-F
- Network Controllers
- 2 Intel® I210-AT Gigabit Ethernet LAN ports Supports 10BASE-T, 100BASE-TX and 1000BASE-T, RJ45 output
- IPMI
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
- RAID
- SATA3 (6 Gb/s) via C236 controller RAID 0, 1, 5, 10 support
- Video
- ASPEED AST2400 BMC
- Fans
- 2 x 40x56 mm counter-rotating PWM fans
- PC Health Monitoring
- Monitors for CPU cores, +3.3V, +5V, +12V, +5V standby, VBAT, HT, memory, chipset voltages. Total of 5 fan headers supporting up to 5 fans 2 fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control Pulse Width Modulation (PWM) fan connectors CPU and chassis environment monitoring CPU thermal trip support I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI System information indicator Suspend static indicator LED UID/remote UID Chassis intrusion detection Chassis intrusion header RoHS, halogen-free
Need a technical consultation on choosing a server?
Submit a request
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
Free shipping on orders over 500 € in the EU, £500 in the UK, and $3,000 in the USA
to Buy a Server
from Servermall
Usually, it would take us 20-30 minutes. Yes, we are that quick
Once again? we’ll be quick. Besides, we’ll deliver the equipment to any city.
You can return any equipment within 30 days. No questions asked. Full amount refunded. No offense taken
In any warranty case, we’ll promptly repair or replace the failed equipment. Onsite. For free. For 5 years.
We own a warehouse in Vilnius: it helps us quickly ship the equipment across Europe, the UK and the USA.
We’ ll always provide you with after-sales support. Our experts will help you solve any problem.
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.