Server Supermicro 6028R-TT
- Processor
- Intel® Xeon® processor E5-2600 v4 v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011) Up to 22 cores / up to 55MB † cache QPI system bus up to 9.6 GT/s
- Memory Capacity
- 16x 288-pin DDR4 DIMM slots Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM Memory type: 2400 /2133/1866/1600 MHz ECC DDR4 SDRAM 72-bit DIMM module sizes: RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- Chipset
- LRDIMM: 64GB, 32GB
- I/O Ports
- 3DS LRDIMM: 128GB Memory voltage 1.2V Corrects single-bit errors
- Chassis
- Intel® C612
- Dimensions and Weight
- 6 SATA3 ports (6 Gb/s) 2 integrated SATA3 ports (6 Gb/s) 2 powered SATA3 ports supporting SATA DOM 2 RJ45 10GBase-T LAN ports 1x RJ45 dedicated IPMI LAN port Rear USB: 2x USB 3.0 + 2x USB 2.0 USB header: 2x 3.0, 4x 2.0, 1x type A 1 VGA port 1x COM port 2 Super DOM (Disk on Module) ports
- Expansion Slots
- 2U rackmount Model CSE-823TQ-653LPB
- Drive Bays
- Height 3.5 inches (89 mm) x Width 19 inches (490 mm) x Depth 27 inches (680 mm) Net weight: 31 lbs (14.2 kg) Gross weight: 51.5 lbs (23.6 kg)
- Power Supply
- 3x PCI-E 3.0 x16 (low-profile) 3x PCI-E 3.0 x8 (low-profile)
- Operating Environment
- 6x 3.5-inch hot-swap SATA hard drive trays
- Network Controllers
- High-efficiency 650W AC-DC Gold power supply
- IPMI
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 60°C (-40°F to 140°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- RAID
- Dual-port Intel® X540 10GBase-T processor Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
- Video
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
- Fans
- SATA 3.0 (6 Gb/s) with RAID 0, 1, 5, 10
- BIOS
- ASPEED AST2400 BMC
- Motherboard
- 4 x 80 cm redundant hot-swap PWM cooling fans
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.