Server Supermicro SSG-620P-ACR16L
- Processor
- Dual Socket P+ (LGA-4189) 3rd Gen Intel® Xeon® Scalable processors CPU TDP support 120-270W up to 38C/96T
- Memory Capacity
- Up to 57MB cache
- Chipset
- Memory capacity: 16 DIMM slots Up to 4TB: 16x 256GB DRAM Memory type: 3200 MHz ECC DDR4 RDIMM
- I/O Ports
- LRDIMM
- Chassis
- DCPMM Note 2 additional DIMM slots available for Intel® Optane™ DCPMM @ 2666 MHz Memory voltage 1.2V ECC
- Dimensions and Weight
- Intel® C621A
- Expansion Slots
- 1 dedicated IPMI LAN RJ45 port 2 RJ-45 10Gbase-T ports 4 USB 3.0 ports (4 rear_USB) 1 VGA port(s) 1 COM port(s) (1 rear) 2 Super DOM (Disk on Module) ports
- Drive Bays
- 2U rackmount Model CSE-829HE1C4-R1K62LPB
- Power Supply
- Height 3.5 inches (89 mm) Width 17.2 inches (437 mm) Depth 27.75 inches (705 mm) Package 10.8 inches (H) x 25.9 inches (W) x 39.3 inches (D) Net weight: 41.5 lbs (18.82 kg) Gross weight: 62 lbs (28.12 kg)
- Operating Environment
- PCI-Express (PCI-E) Slot 2: PCI-E 4.0 x16 LP Slot 3: PCI-E 4.0 x16 LP Slot 4: PCI-E 4.0 x16 LP Slot 5: PCI-E 4.0 x16 LP Slot 6: PCI-E 4.0 x8 LP Note PCIe slot 1 occupied by storage controller
- Network Connection
- 16 hot-swap 3.5-inch SATA3/SAS3 drive bays (4 hybrid 3.5-inch NVMe) 1 M.2 NVMe slot
- IPMI
- Redundant 1600W power supplies with PMBus Titanium
- System BIOS
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 60°C (-40°F to 140°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- Software
- 2x 10GbE BaseT with Intel® X550
- Fans
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Monitoring
- BIOS type AMI 128 MB SPI Flash EEPROM
- Motherboard
- IPMI 2.0 SUM NMI Watch Dog SuperDoctor® 5
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.