Server Supermicro 6028R-T
- Processor
- Intel® Xeon® processor E5-2600 v4 / v3 family (up to 145W TDP) Dual Socket R3 (LGA 2011) Up to 22 cores / up to 55MB cache QPI system bus up to 9.6 GT/s
- Memory Capacity
- 16x 288-pin DDR4 DIMM slots Up to 2TB † ECC 3DS LRDIMM, 512GB ECC RDIMM Memory type: 2400 † /2133/1866/1600 MHz ECC DDR4 SDRAM 72-bit DIMM module sizes: RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- Chipset
- LRDIMM: 64GB, 32GB
- I/O Ports
- 3DS LRDIMM: 128GB
- Chassis
- Memory voltage 1.2V Corrects single-bit errors
- Dimensions and Weight
- Intel® C612
- Expansion Slots
- 6 SATA3 ports (6 Gb/s) 2 integrated SATA3 ports (6 Gb/s) 2 powered SATA3 ports supporting SATA DOM 2 RJ45 Gigabit Ethernet LAN ports 1x RJ45 dedicated IPMI LAN port Rear USB: 2x USB 3.0 + 2x USB 2.0 USB header: 2x 3.0, 4x 2.0, 1x type A 1 VGA port 1x COM port
- Drive Bays
- 2U rackmount Model CSE-823TQ-653LPB
- Power Supply
- Height 3.5 inches (89 mm) x Width 19 inches (490 mm) x Depth 27 inches (680 mm) Net weight: 31 lbs (14.2 kg) Gross weight: 51.5 lbs (23.6 kg)
- Operating Environment
- 3x PCI-E 3.0 x16 (low-profile) 3x PCI-E 3.0 x8 (low-profile)
- Network Controllers
- 6x 3.5-inch hot-swap SATA hard drive trays
- IPMI
- High-efficiency 650W AC-DC Gold power supply
- RAID
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 60°C (-40°F to 140°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- Video
- Dual-port Intel® i350 Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
- Fans
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
- BIOS
- SATA 3.0 (6 Gb/s) with RAID 0, 1, 5, 10
- Motherboard
- ASPEED AST2400 BMC
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.