Server Supermicro AS -2024S-TR
- Processor
- Dual Socket SP3 AMD EPYC™ 7002/7003 series processors CPU TDP support 240W up to 64C/128T
- Memory Capacity
- Up to 256MB cache
- Chipset
- Memory capacity: 16 DIMM slots Up to 4TB: 16x 256GB DRAM Memory type: 3200 MHz ECC DDR4 RDIMM, LRDIMM
- I/O Ports
- AMD SP3
- Chassis
- 1 dedicated IPMI LAN RJ45 port 2 RJ45 1GbE LAN ports 4 USB 3.0 ports (4 rear_USB) 1 VGA port(s) 1 COM port(s) (1 COM) 2 Super DOM (Disk on Module) ports
- Dimensions and Weight
- 2U rackmount Model CSE-LA26TS-R920LPP1
- Expansion Slots
- Height 3.5 inches (89 mm) Width 17.2 inches (437 mm) Depth 25.5 inches (648 mm) Package 11.4 inches (H) x 26.7 inches (W) x 34.5 inches (D) Net weight: 33.5 lbs (15.2 kg) Gross weight: 60 lbs (27.2 kg)
- Drive Bays
- Slot 1: PCI-E 4.0 x8 LP Slot 2: PCI-E 4.0 x16 LP Slot 3: PCI-E 4.0 x8 LP Slot 4: PCI-E 4.0 x16 LP Slot 5: PCI-E 4.0 x8 LP Slot 6: PCI-E 4.0 x16 LP
- Power Supply
- 12 tool-less hot-swap 3.5-inch SATA/NVME drive bays (tool-less for 3.5-inch drives, screws required for 2.5-inch drives. Default drive configuration is 8 SATA + 4 NVMe, other configurations require additional parts) M.2 1 M.2 NVMe M-key slot, 2280, 22110
- Operating Environment
- Redundant 920W Platinum efficiency level power supply
- Network Controllers
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 60°C (-40°F to 140°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- IPMI
- 2 1GbE BaseT ports
- Hard Drive Backplane
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Fans
- Supports 12 SATA3 or 12 SAS3 or 4 NVMe Default disk configuration is 8 SATA + 4 NVMe, other configurations require additional components.
- PC Health Monitoring
- 3 medium 80 mm fans
- Motherboard
- 4+1 phase voltage regulator Monitors for CPU cores, chipset voltages, memory. Fans with tachometer Pulse Width Modulation (PWM) fan connectors Status monitor for speed control CPU and chassis environment monitoring Thermal control for fan connectors
- Software
- Super H12DSi-N6
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.