Server Supermicro SYS-1029P-MTR
- Processor
- Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable processors and Intel® Xeon® Scalable processors ‡ , Dual UPI up to 10.4 GT/s CPU TDP support 70-140W with IVR Up to 28 cores
- Memory Capacity
- 8 DIMM slots Up to 2TB 3DS ECC DDR4-2933 MHz † RDIMM/LRDIMM Memory type 2933 /2666/2400/2133 MHz ECC DDR4 RDIMM/LRDIMM
- Chipset
- Intel® C621
- On-Board Devices
- SATA3 (6 Gb/s) RAID 0, 1, 5, 10 Marvell 88E1512 PHY Gigabit Ethernet controller Supports 1000BASE-T IPMI Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
- I/O Ports
- 8 SATA3 ports (6 Gb/s) 2 RJ45 Gigabit Ethernet LAN ports 1 dedicated IPMI LAN RJ45 port 2 USB 2.0 ports (rear) 1 VGA port 1 COM port (header) 2 Super DOM (Disk on Module) ports
- Software
- Intel® Node Manager IPMI 2.0 KVM with dedicated LAN NMI SSM, SPM, SUM SuperDoctor® 5 Watch Dog ACPI / APM Power Management
- Form Factor
- 1U Rackmount
- Dimensions and Weight
- Width 17.2 inches (437 mm) Height 1.7 inches (43 mm) Depth 19.98 inches (508 mm) Gross weight 31.1 lbs (14.1 kg)
- Expansion Slots
- 1 PCI-E 3.0 x8 slot (FHHL)
- Drive Bays
- 8 hot-swap 2.5-inch SATA3 drive bays
- Power Supply
- Redundant 800W power supplies with PMBus
- Environmental Specifications
- Operating temperature: 10 ° C ~ 35 ° C (50 ° F ~ 95 ° F) Storage temperature: -40 ° C to 60 ° C (-40 ° F to 140 ° F) Operating relative humidity: 8% to 90% (non-condensing) Storage relative humidity: 5% to 95% (non-condensing)
- Fans
- 4 x 4 cm medium cooling fans 22.5 thousand rpm
- Optional
- Slim DVD-ROM drive (optional) PCIe/SATA M.2 drive (optional)
- PC Health Monitoring
- Monitors for CPU cores, chipset voltages, memory. 4+1 phase voltage regulator Fans with tachometer Status monitor for speed control Pulse Width Modulation (PWM) fan connectors CPU and chassis environment monitoring Thermal control for fan connectors
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.