Server Supermicro SYS-2029GP-TR
- Processor
- Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable processors and Intel® Xeon® Scalable processors , 3 UPI up to 10.4 GT/s CPU TDP support 70-205W Up to 28 cores To support 2nd Gen Intel® Xeon® Scalable processors (codename Cascade Lake-R), BIOS version 3.2 or higher required.
- Memory Capacity
- 16 DIMM slots Up to 4TB 3DS ECC DDR4-2933 MHz † RDIMM/LRDIMM Supports Intel® Optane™ DCPMM †† Memory type 2933 † /2666/2400/2133 MHz ECC DDR4 RDIMM/LRDIMM 2933 MHz in two DIMMs per channel can only be achieved using memory purchased from Supermicro
- Chipset
- Intel C621
- SATA
- SATA3 (6 Gb/s) with RAID 0, 1, 5, 10
- I/O Ports
- 1 dedicated IPMI LAN RJ45 port 2 USB 3.0 ports (rear) 1 VGA port 1 fast UART 16550 header
- IPMI
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Graphics
- ASPEED AST2500 BMC
- Dimensions and Weight
- Height 3.5 inches (89 mm) Width 17.2 inches (437 mm) Depth 24.8 inches (630 mm) Net weight: 38 lbs (17.4 kg)
- Supported Graphics Processors
- 6 PCI-E 3.0 x16 double/single width cards (full height, full length) NVIDIA V100, M10, T4, Quadro RTX Interprocessor-Graphics Processor: PCI-E Gen 3 x16 Switch Interconnect CPU-GPU
- Drive Bays
- 8 hot-swap 2.5-inch SAS/SATA drive bays 2 hot-swap 2.5-inch SATA/NVMe drive bays
- Expansion Slots
- PCI-Express 6 PCI-E 3.0 x16 slots (FHFL) — support for up to 6 GPUs 1 PCI-E 3.0 x8 slot (in x16, LP)
- Fans
- 5x8 cm heavy-duty fans with optimal fan speed control
- Chassis
- 2U Rackmount Model CSE-218GH-R2K03B
- Motherboard
- Super X11DPG-SN
- Dimensions and Weight
- Height 3.5 inches (89 mm) Width 17.2 inches (437 mm) Depth 31 inches (787 mm) Package 26.5 inches (H) x 11 inches (W) x 44.5 inches (D) Net weight: 39.5 lbs (17.9 kg) Gross weight: 54 lbs (24.5 kg)
- BIOS Type
- AMI 256 MB SPI Flash memory
- Software
- Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.