Server Supermicro SYS-210P-FRDN6T
- Processor
- Single Socket P+ (LGA-4189) 3rd Gen Intel® Xeon® Scalable processors CPU TDP support 85-270W
- Memory Capacity
- Memory capacity: 8 DIMM slots Memory type: 3200 MHz ECC DDR4 RDIMM/LRDIMM Memory voltage 1.2V Error detection ECC
- Chipset
- Intel® C621A
- I/O Ports
- 2 USB 2.0 ports (2 front) 2 USB 3.0 ports (2 front) 1 VGA port(s) 1 COM port(s) (1 rear)
- Form Factor
- 2U Rackmount
- Dimensions and Weight
- Height 3.5 inches (89 mm) Width 17.2 inches (437 mm) Depth 11.8 inches (298.8 mm) Package 7.4 inches (H) x 19.3 inches (W) x 23.3 inches (D) Net weight: Net weight: 17 lbs (7.7 kg) Gross weight: 22 lbs (10 kg)
- PCI-Express (PCI-E) Expansion Slots
- Slot 1: PCIe 4.0 x16 or x8 slot (low-profile) Slot 2: PCIe 4.0 x16 x8 slot (low profile will be disabled if slot 1 is configured as PCIe 4.0 x16) Slot 3: 1 PCI-E 4.0 x8 FHHL (optional, if CPU less than 165W with 1U heatsink) Slot 5: 1 PCI-E 4.0 x16 FHHL Slot 6: 1 PCI-E 4.0 x16 FHHL
- Drive Bays
- 2x 2.5-inch hot-swap SATA hard drive bays 1 M.2 NVMe connector OR 1 M.2 SATA3 connector M-key, 2280/22110
- Power Supply
- Redundant -48V DC 600W power supplies with PMBus
- Operating Environment
- Operating temperature: 10°C to 35°C (50°F to 95°F) Non-operating temperature: -40°C to 60°C (-40°F to 140°F) Operating relative humidity: 8% to 90% (non-condensing) Non-operating relative humidity: 5% to 95% (non-condensing)
- Network Connection
- 2 1/10GbE ports
- IPMI
- 4 1GbE ports
- SATA
- Intelligent Platform Management Interface v.2.0 support IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Fans
- SATA3 (6 Gb/s)
- Motherboard
- RAID 0/1 support
- PC Health Monitoring
- 4 powerful fans with optimal fan speed control
- Software
- Super X12SPM-LN6TF
Need a technical consultation on choosing a server?
Submit a requestto buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.