DELL PowerEdge R360 Server
You might be interested in
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
- Processor
- One Intel® Xeon® 6300 series or one Intel® Xeon® E-2400 series processor with up to 8 cores or
One Intel® Pentium® G7400/G7400T processor with 2 cores - Memory
- 4 DDR5 DIMM slots, supports UDIMM 128 GB max, speeds up to 4400 MT/s
- Supports unregistered ECC DDR5 DIMMs only
- Storage controllers
- Internal Controllers: HBA355i Adpt, PERC H355 Adpt, PERC H755 Adpt, HBA355i front, H355 front, H755 front
- Internal Boot: Internal USB 3.0, or Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 SSDs, USB
- External HBAs (non-RAID): HBA355e Adpt
- Software Controller: S160
- Drive Bays
- Front bays:
- Up to 4 x 3.5-inch SAS/SATA (HDD/SSD) max 64 TB
- Up to 8 x 2.5-inch SAS/SATA (SSD) max 61.44 TB
- Power Supplies
- 600 W Platinum 100 — 240 VAC or 240 VDC, hot swap redundant
- 700 W Titanium 200 — 240 VAC or 240 VDC, hot swap redundant
- Cooling Options
- Air cooling
- Fans
- Up to 4 fans
- Dimensions
- Height – 42.8 mm (1.68 inches)
- Width – 482.0 mm (18.97 inches)
- Depth – 585.3 mm (23.04 inches) without bezel
- Depth — 598.9 mm (23.57 inches) with bezel
- Form Factor
- 1U rack server
- Embedded Management
- iDRAC9
- iDRAC Direct
- iDRAC RESTful API with Redfish
- iDRAC Service Manual
- Bezel
- Security bezel or Optional Filter bezel
- OpenManage Integrations
- BMC Truesight
- Microsoft System Center
- OpenManage Integration with ServiceNow
- Red Hat Ansible Modules
- Terraform Providers
- VMware vCenter and vRealize Operations Manager
- Security
- Cryptographically signed firmware
- Data at Rest Encryption (SEDs with local or external key mgmt)
- Secure Boot
- Secured Component Verification (Hardware integrity check)
- Secure Erase
- Secured-core server
- Silicon Root of Trust
- System Lockdown (requires iDRAC9 Enterprise or Datacenter)
- TPM 2.0 FIPS, CC-TCG certified, TPM 2.0 China NationZ
- Embedded NIC
- 2 x 1 GbE LOM
- GPU Options
- 1 x 60 W single-width GPU
- Ports
- Front Ports:
- 1 x iDRAC Direct (Micro-AB USB) port
- 1 x USB 2.0
- 1 x Dedicated iDRAC Ethernet port
- 1 x USB 2.0
- 1 x USB 3.2 Gen1
- 1 x VGA
- 1 x Serial
- 1 x USB 3.2 Gen1
- PCIe
- Up to two PCIe Gen4 slots on the Gen4 Riser
- Slot 1: 1 x8 with x8 bandwidth, Half Length, Low Profile
- Slot 2: 1 x16 with x8 bandwidth, Half Length, Low Profile
- One dedicated PCIe x8 slot on the system board for internal PERC
- Operating System and Hypervisors
- Canonical Ubuntu Server LTS
- Microsoft Windows Server with Hyper-V
- Red Hat Enterprise Linux
- SUSE Linux Enterprise Server
- VMware ESXi
- Mobility
- OpenManage Mobile
- OpenManage Software
- OpenManage Enterprise
- OpenManage Power Manager plugin
- OpenManage Service plugin
- OpenManage Update Manager plugin
- CloudIQ for PowerEdge plug in
- OpenManage Enterprise Integration for VMware vCenter
- OpenManage Integration for Microsoft System Center
- OpenManage Integration with Windows Admin Center
Dell PowerEdge R360 overview
Dell PowerEdge R360 is a 1U, single-socket rack server for SMB, ROBO, near-edge, collaboration, business applications, real-time database management and lightweight virtualization. It is designed for environments that need entry 1U rack deployment, redundant power options, hot-plug storage, DDR5 ECC memory and optional entry GPU support.
The R360 server is based on one Intel Xeon 6300 series or Intel Xeon E-2400 series processor with up to 8 cores, or one Intel Pentium G7400/G7400T processor with up to 2 cores. It supports 4 DDR5 ECC UDIMM slots, up to 128 GB and speeds up to 4400 MT/s, iDRAC9 and Dell OpenManage, embedded 2 x 1GbE LOM networking and optional OCP or PCIe networking where supported, PCIe Gen4 expansion and 4 x 3.5-inch, 8 x 2.5-inch, or 6 x 2.5-inch SAS/SATA plus 2 x 2.5-inch direct-attach NVMe drive layouts.
The Dell PowerEdge R360 server is suitable for SMB, ROBO, near-edge, collaboration, business applications, real-time database management and lightweight virtualization. It should be treated as a powerful entry rack server for SMB and near-edge workloads, not as a generic replacement for every adjacent PowerEdge model.
When to choose Dell PowerEdge R360
Choose Dell PowerEdge R360 when the workload needs entry 1U rack deployment, redundant power options, hot-plug storage, DDR5 ECC memory and optional entry GPU support in a validated Dell PowerEdge platform. It is a good fit for SMB, ROBO, near-edge, collaboration, business applications, real-time database management and lightweight virtualization where compute, RAM, local storage, networking and power must be sized as one configuration.
Compared with Dell PowerEdge R260, Dell PowerEdge R360 should be selected when its processor platform, form factor, I/O placement and drive layout match the project better. Compared with Dell PowerEdge T360, validate whether the workload needs Intel or AMD processors, rack or tower deployment, and the required storage or accelerator limits.
The R360 configuration should be validated carefully for processor type, memory population, drive bay layout, storage controller, BOSS or M.2 boot, OCP networking, risers, GPU or accelerator support where applicable, power supplies, fan type and cooling.
Chassis and drive bay options
Dell PowerEdge R360 supports several chassis and drive bay layouts. The right option depends on whether the server is being configured for balanced virtualization, high-density SSD storage, capacity-oriented storage, NVMe performance or accelerator-heavy workloads.
| Chassis option | Best for | Comment |
|---|---|---|
| Dell PowerEdge R360 4LFF | capacity-oriented workloads, backup, archive storage and file services | Supports 4 x 3.5-inch SAS/SATA drives. This is the practical starting point when local capacity, backup windows and simple file services matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge R360 8SFF | balanced virtualization, business applications and mixed enterprise workloads | Supports 8 x 2.5-inch SAS/SATA drives. This is the practical starting point when standard serviceability and flexible drive selection matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge R360 6SFF + 2 NVMe | low-latency databases, high-I/O virtualization, analytics and NVMe-focused storage | Supports 6 x 2.5-inch hot-swap SAS/SATA drives through PERC plus 2 x 2.5-inch direct-attach NVMe drives. This is the practical starting point when latency and high I/O throughput matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge BOSS-N1 boot options | separating OS or hypervisor boot from front data drives | BOSS-N1, BOSS-N1 DC-MHS or M.2 boot options can provide dedicated boot media, often with hardware RAID 1 on two M.2 NVMe SSDs depending on platform. Check the selected boot device, cable kit and controller rules. |
For balanced enterprise deployments, SFF or Universal drive configurations are usually the practical starting point. For capacity workloads, use the model-specific LFF or high-count SATA layouts where available. For latency-sensitive databases, high-I/O virtualization, analytics and AI data pipelines, NVMe or EDSFF E3.S configurations should be considered.
Final drive compatibility depends on the selected chassis, backplane, controller, BOSS or M.2 boot option, risers, GPU configuration, power supply and Dell support matrix. NVMe and EDSFF support should not be assumed from the server model name alone.
Recommended Dell PowerEdge R360 configurations by workload
| Workload | Recommended focus |
|---|---|
| ROBO / near edge | Compact server sizing, reliable boot, local protected storage, simple remote management and power planning. |
| Office / SMB infrastructure | Cost-effective CPU, ECC memory, protected local storage, quiet operation and Dell remote management. |
| Databases / data management | Processor choice matched to licensing and query profile, enough RAM for cache, low-latency storage and protected design. |
| Backup / archive | Capacity-oriented drive layout, moderate CPU/RAM and network throughput sized for backup windows. |
| AI inference / accelerator workloads | Validated accelerator model, riser and power planning, sufficient memory, fast local NVMe storage and thermal validation. |
| Mixed enterprise workloads | Balanced CPU, RAM, storage and NIC choices, with headroom for failover, maintenance and growth. |
The R360 configuration should be chosen around the main reason for selecting this platform: entry 1U rack deployment, redundant power options, hot-plug storage, DDR5 ECC memory and optional entry GPU support, Dell PowerEdge management and a storage layout matched to the workload.
How to choose CPU, RAM, RAID and storage
Dell PowerEdge R360 uses one Intel Xeon 6300 series or Intel Xeon E-2400 series processor with up to 8 cores, or one Intel Pentium G7400/G7400T processor with up to 2 cores. CPU selection should account for workload profile, software licensing, thermal limits and whether the application benefits more from core density, per-core performance or memory bandwidth.
RAM planning should start with VM density, database cache, container scheduling and future growth. Dell PowerEdge R360 supports 4 DDR5 ECC UDIMM slots, up to 128 GB and speeds up to 4400 MT/s. DIMM capacities and operating speeds depend on processor type and population rules.
For storage, select the drive layout around capacity, latency and serviceability. 4 x 3.5-inch, 8 x 2.5-inch, or 6 x 2.5-inch SAS/SATA plus 2 x 2.5-inch direct-attach NVMe drive layouts Hardware RAID should be selected around validated PERC controller options, while HBA/JBOD mode is usually preferred for software-defined storage platforms that manage disks directly.
BOSS-N1, BOSS-N1 DC-MHS or M.2 boot options can separate OS or hypervisor boot from the main data drives where supported. Mixed SAS, SATA, NVMe and EDSFF designs must follow Dell controller and backplane rules.
Networking, PCIe, GPU and power should be validated as part of the same configuration. OCP NIC 3.0, PCIe risers, accelerator support, cooling options, fan type and PSU choice can all affect the final supported build.
Dell PowerEdge R360 vs related Dell PowerEdge models
| Model | When to consider |
|---|---|
| Dell PowerEdge R260 | Choose R260 when its 1U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge T360 | Choose T360 when its 4.5U tower server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R660xs | Choose R660xs when its 1U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R660 | Choose R660 when its 1U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R-Series Servers | Use the R-Series category when comparing broader rack server options. |
Dell PowerEdge R360 is the right reference point when the requirement matches its processor platform, form factor and storage design. It should not be positioned as interchangeable with older PowerEdge generations or with a different Intel or AMD platform without validating CPU, memory, storage, I/O and cooling rules.
Summary: is Dell PowerEdge R360 the right server for your workload×
Dell PowerEdge R360 is a strong Dell PowerEdge server for SMB, ROBO, near-edge, collaboration, business applications, real-time database management and lightweight virtualization. Choose it when you need entry 1U rack deployment, redundant power options, hot-plug storage, DDR5 ECC memory and optional entry GPU support with one Intel Xeon 6300 series or Intel Xeon E-2400 series processor with up to 8 cores, or one Intel Pentium G7400/G7400T processor with up to 2 cores, 4 DDR5 ECC UDIMM slots, up to 128 GB and speeds up to 4400 MT/s and Dell PowerEdge management. Before purchase, confirm CPU type, RAM population, drive bay layout, RAID or HBA mode, BOSS or M.2 boot option, OCP networking, risers, GPU or accelerator support where applicable, cooling, PSU and warranty requirements.
asked
questions
Ask to consultant
The Servermall warranty includes:
- Access on a 24x7 basis (including holidays) to the Servermall Customer Service and Support organization for troubleshooting assistance of Servermall Refurbished Servers and Associated Goods and select software issues.
- 5 year warranty. In case of problem diagnostics or repair, we will do on the server installation site. For free.
- On-site dispatch of replacement parts to the Installation Site or other mutually agreed upon Customer’s business location approved by Servermall to address a Product problem.
Subscribe to our news and get a 50 € discount on the server.
Free shipping across EU if ordering equipment from 500 €. Delivery from 4 working days.
to buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.