DELL PowerEdge R7625 Server
You might be interested in
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
- Processor
- Up to two AMD EPYC 4th Generation 9004 Series with up to 128 cores per processor
- Memory
- 24 DDR5 DIMM slots, supports RDIMM 6 TB max, speeds up to 4800 MT/s
- Supports registered ECC DDR5 DIMMs only
- Storage controllers
- Internal Controllers (RAID): PERC H965i, PERC H755, PERC H755N, PERC H355, HBA355i
- Internal Boot: Boot Optimized Storage Subsystem (BOSS-N1): HWRAID 2 x M.2 NVMe SSDs or USB
- External HBA (non-RAID): HBA355e
- Software RAID: S160
- Drive Bays
- Front bays:
- Up to 8 x 3.5-inch SAS/SATA (HDD/SSD) max 160 TB
- Up to 12 x 3.5-inch SAS/SATA (HDD/SSD) max 240 TB
- Up to 8 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) max 122.88 TB
- Up to 16 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) max 245.76 TB
- Up to 24 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) max 368.64 TB
- Up to 8 x EDSFF E3.S Gen5 NVMe (SSD) max 61.44 TB
- Up to 16 x EDSFF E3.S Gen5 NVMe (SSD) max 122.88 TB
- Up to 32 x EDSFF E3.S Gen5 NVMe (SSD) max 245.76 TB
- Up to 2 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) max 30.72 TB
- Up to 4 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) max 61.44 TB
- Up to 4 x E3.S (NVMe Gen5 ) max 30.72 TB
- Power Supplies
- 3200 W Titanium 277 VAC or 336 VDC, hot swap redundant
- 2800 W Titanium 200 — 240 VAC or 240 HVDC, hot swap redundant
- 2400 W Platinum 100 — 240 VAC or 240 HVDC, hot swap redundant
- 1800 W Titanium 200 — 240 VAC or 240 HVDC, hot swap redundant
- 1400 W Mixed Mode Platinum 100-240 VAC or 240 HVDC hot swap redundant
- 1400 W Mixed Mode Titanium 277 VAC or 336 HVDC hot swap redundant
- 1100 W Titanium 100 — 240 VAC or 240 HVDC, hot swap redundant
- 1100 W LVDC -48 — -60 VDC, hot swap redundant
- 800 W Platinum 100 — 240 VAC or 240 HVDC, hot swap redundant
- Cooling Options
- Air cooling
- Optional Direct Liquid Cooling (DLC)
- Fans
- High performance Silver (HPR) fans/ High performance Gold (VHP) fans
- Up to 6 hot plug fans
- Dimensions
- Height – 86.8 mm (3.41 inches)
- Width – 482 mm (18.97 inches)
- Depth – 772.13 mm (30.39 inches) with bezel
– 758.29 mm (29.85 inches) without bezel
- Form Factor
- 2U rack server
- Embedded Management
- iDRAC9
- iDRAC Direct
- iDRAC RESTful API with Redfish
- iDRAC Service Module
- Quick Sync 2 wireless module
- Bezel
- Optional LCD bezel or security bezel
- OpenManage Software
- CloudIQ for PowerEdge plug in
- OpenManage Enterprise
- OpenManage Enterprise Integration for VMware vCenter
- OpenManage Integration for Microsoft System Center
- OpenManage Integration with Windows Admin Center
- OpenManage Power Manager plugin
- OpenManage SupportAssist plugin
- OpenManage Update Manager plugin
- Mobility
- OpenManage Mobile
- OpenManage Integrations
- BMC Truesight
- Microsoft System Center
- OpenManage Integration with ServiceNow
- Red Hat Ansible Modules
- Terraform Providers
- VMware vCenter and vRealize Operations Manager
- Security
- AMD Secure Memory Encryption (SME)
- AMD Secure Encrypted Virtualization (SEV)
- Cryptographically signed firmware
- Data at Rest Encryption (SEDs with local or external key mgmt)
- Secure Boot
- Secured Component Verification (Hardware integrity check
- Secure Erase
- Silicon Root of Trust
- System Lockdown (requires iDRAC9 Enterprise or Datacenter)
- TPM 2.0 FIPS, CC-TCG certified, TPM 2.0 China NationZ
- Embedded NIC
- 2 x 1GbE LOM card (optional)
- Network Options
- 1 x OCP card 3.0 (optional)
Note: The system allows either LOM card or an OCP card or both to be installed in the system. - GPU Options
- Up to 2 x 300 W DW or 6 x 75 W SW
- Ports
- Front Ports
- 1 x iDRAC Direct (Micro-AB USB) port
- 1 x USB 2.0
- 1 x VGA
- 1 x Dedicated iDRAC ethernet port
- 1 x USB 2.0
- 1 x USB 3.0
- 1 x Serial (optional)
- 1 x VGA (optional for Direct Liquid Cooling configuration)
- 1 x USB 3.0 (optional)
- PCIe
- Up to eight PCIe slots:
- Slot 1: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half length
- Slot 2: 1 x8/1 x16 Gen5 or 1 x8 Gen4 Full height, Half length or 1 x16 Gen5 Full height Full length
- Slot 3: 1 x16 Gen4 Low profile, Half length
- Slot 4: 1 x8 Gen4 Full height, Half length
- Slot 5: 1 x8 Gen4 Full height, Half length or 1 x16 Gen4 Full height , Full length
- Slot 6: 1 x16 Gen4 Low profile, Half length
- Slot 7: 1 x8/1 x16 Gen5 or 1 x8 Gen4 Full height, Half length or 1 x16 Gen5 Full height, Full length
- Slot 8: 1 x8 Gen5 or 1 x8 Gen4 Full height, Half length
- Operating System and Hypervisors
- Canonical Ubuntu Server LTS
- Microsoft Windows Server with Hyper-V
- Red Hat Enterprise Linux
- SUSE Linux Enterprise Server
- VMware ESXi
Dell PowerEdge R7625 overview
Dell PowerEdge R7625 is a 2U, dual-socket rack server for HPC, VDI, virtualization, databases, data analytics, software-defined storage and selected GPU-accelerated workloads. It is designed for environments that need dual-socket AMD EPYC performance, large DDR5 memory, PCIe Gen5, optional DLC, flexible LFF/SFF storage and EDSFF Gen5 NVMe.
The R7625 server is based on two 4th Generation AMD EPYC 9004 Series processors with up to 128 cores per processor. It supports 24 DDR5 RDIMM slots, up to 6 TB and speeds up to 4800 MT/s, iDRAC9 and Dell OpenManage, embedded 2 x 1GbE LOM networking and optional OCP or PCIe networking where supported, PCIe Gen5 expansion and 8/12 x 3.5-inch, 8/16/24 x 2.5-inch SAS/SATA/NVMe, up to 32 x EDSFF E3.S Gen5 NVMe and rear drive options.
The Dell PowerEdge R7625 server is suitable for HPC, VDI, virtualization, databases, data analytics, software-defined storage and selected GPU-accelerated workloads. It should be treated as a flexible 2U dual-socket AMD EPYC enterprise server, not as a generic replacement for every adjacent PowerEdge model.
When to choose Dell PowerEdge R7625
Choose Dell PowerEdge R7625 when the workload needs dual-socket AMD EPYC performance, large DDR5 memory, PCIe Gen5, optional DLC, flexible LFF/SFF storage and EDSFF Gen5 NVMe in a validated Dell PowerEdge platform. It is a good fit for HPC, VDI, virtualization, databases, data analytics, software-defined storage and selected GPU-accelerated workloads where compute, RAM, local storage, networking and power must be sized as one configuration.
Compared with Dell PowerEdge R7615, Dell PowerEdge R7625 should be selected when its processor platform, form factor, I/O placement and drive layout match the project better. Compared with Dell PowerEdge R6625, validate whether the workload needs Intel or AMD processors, rack or tower deployment, and the required storage or accelerator limits.
The R7625 configuration should be validated carefully for processor type, memory population, drive bay layout, storage controller, BOSS or M.2 boot, OCP networking, risers, GPU or accelerator support where applicable, power supplies, fan type and cooling.
Chassis and drive bay options
Dell PowerEdge R7625 supports several chassis and drive bay layouts. The right option depends on whether the server is being configured for balanced virtualization, high-density SSD storage, capacity-oriented storage, NVMe performance or accelerator-heavy workloads.
| Chassis option | Best for | Comment |
|---|---|---|
| Dell PowerEdge R7625 8LFF / 12LFF | capacity-oriented workloads, backup, archive storage and file services | Supports up to 8 x 3.5-inch SAS/SATA max 160 TB or 12 x 3.5-inch max 240 TB. This is the practical starting point when local capacity, backup windows and simple file services matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge R7625 24SFF | low-latency databases, high-I/O virtualization, analytics and NVMe-focused storage | Supports up to 24 x 2.5-inch SAS/SATA/NVMe drives, max 368.64 TB. This is the practical starting point when latency and high I/O throughput matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge R7625 EDSFF E3.S Gen5 NVMe | dense EDSFF Gen5 NVMe storage, analytics, AI data pipelines and high-throughput services | Supports up to 8, 16 or 32 EDSFF E3.S Gen5 NVMe drives, max up to 245.76 TB. This is the practical starting point when dense Gen5 NVMe performance matters. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge R7625 GPU configuration | AI inference, graphics, VDI acceleration and validated accelerator workloads | Supports up to 2 x 300 W double-width GPUs or 6 x 75 W single-width accelerators. This is the practical starting point when accelerator density and validated thermal design matter. Final support depends on backplane, controller, cabling and Dell validation. |
| Dell PowerEdge BOSS-N1 boot options | separating OS or hypervisor boot from front data drives | BOSS-N1, BOSS-N1 DC-MHS or M.2 boot options can provide dedicated boot media, often with hardware RAID 1 on two M.2 NVMe SSDs depending on platform. Check the selected boot device, cable kit and controller rules. |
For balanced enterprise deployments, SFF or Universal drive configurations are usually the practical starting point. For capacity workloads, use the model-specific LFF or high-count SATA layouts where available. For latency-sensitive databases, high-I/O virtualization, analytics and AI data pipelines, NVMe or EDSFF E3.S configurations should be considered.
Final drive compatibility depends on the selected chassis, backplane, controller, BOSS or M.2 boot option, risers, GPU configuration, power supply and Dell support matrix. NVMe and EDSFF support should not be assumed from the server model name alone.
Recommended Dell PowerEdge R7625 configurations by workload
| Workload | Recommended focus |
|---|---|
| Virtualization / private cloud | Balanced CPU configuration, large DDR5 memory pool, SSD or NVMe storage where needed, redundant networking and room for growth. |
| VDI | High RAM density, predictable CPU performance, fast storage and validated GPU options when graphics acceleration is required. |
| Containers / Kubernetes | Balanced CPU and RAM, reliable boot media, local SSD or NVMe where needed and redundant network connectivity. |
| Databases / data management | Processor choice matched to licensing and query profile, enough RAM for cache, low-latency storage and protected design. |
| Software-defined storage / HCI | Drive layout, HBA/JBOD or controller mode, network bandwidth and CPU/RAM sized for the SDS platform. |
| AI inference / accelerator workloads | Validated accelerator model, riser and power planning, sufficient memory, fast local NVMe storage and thermal validation. |
| Mixed enterprise workloads | Balanced CPU, RAM, storage and NIC choices, with headroom for failover, maintenance and growth. |
The R7625 configuration should be chosen around the main reason for selecting this platform: dual-socket AMD EPYC performance, large DDR5 memory, PCIe Gen5, optional DLC, flexible LFF/SFF storage and EDSFF Gen5 NVMe, Dell PowerEdge management and a storage layout matched to the workload.
How to choose CPU, RAM, RAID and storage
Dell PowerEdge R7625 uses two 4th Generation AMD EPYC 9004 Series processors with up to 128 cores per processor. CPU selection should account for workload profile, software licensing, thermal limits and whether the application benefits more from core density, per-core performance or memory bandwidth.
RAM planning should start with VM density, database cache, container scheduling and future growth. Dell PowerEdge R7625 supports 24 DDR5 RDIMM slots, up to 6 TB and speeds up to 4800 MT/s. DIMM capacities and operating speeds depend on processor type and population rules.
For storage, select the drive layout around capacity, latency and serviceability. 8/12 x 3.5-inch, 8/16/24 x 2.5-inch SAS/SATA/NVMe, up to 32 x EDSFF E3.S Gen5 NVMe and rear drive options Hardware RAID should be selected around validated PERC controller options, while HBA/JBOD mode is usually preferred for software-defined storage platforms that manage disks directly.
BOSS-N1, BOSS-N1 DC-MHS or M.2 boot options can separate OS or hypervisor boot from the main data drives where supported. Mixed SAS, SATA, NVMe and EDSFF designs must follow Dell controller and backplane rules.
Networking, PCIe, GPU and power should be validated as part of the same configuration. OCP NIC 3.0, PCIe risers, accelerator support, cooling options, fan type and PSU choice can all affect the final supported build.
Dell PowerEdge R7625 vs related Dell PowerEdge models
| Model | When to consider |
|---|---|
| Dell PowerEdge R7615 | Choose R7615 when its 2U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R6625 | Choose R6625 when its 1U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R760 | Choose R760 when its 2U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R860 | Choose R860 when its 2U rack server, processor platform and storage limits fit the workload better. |
| Dell PowerEdge R-Series Servers | Use the R-Series category when comparing broader rack server options. |
Dell PowerEdge R7625 is the right reference point when the requirement matches its processor platform, form factor and storage design. It should not be positioned as interchangeable with older PowerEdge generations or with a different Intel or AMD platform without validating CPU, memory, storage, I/O and cooling rules.
Summary: is Dell PowerEdge R7625 the right server for your workload×
Dell PowerEdge R7625 is a strong Dell PowerEdge server for HPC, VDI, virtualization, databases, data analytics, software-defined storage and selected GPU-accelerated workloads. Choose it when you need dual-socket AMD EPYC performance, large DDR5 memory, PCIe Gen5, optional DLC, flexible LFF/SFF storage and EDSFF Gen5 NVMe with two 4th Generation AMD EPYC 9004 Series processors with up to 128 cores per processor, 24 DDR5 RDIMM slots, up to 6 TB and speeds up to 4800 MT/s and Dell PowerEdge management. Before purchase, confirm CPU type, RAM population, drive bay layout, RAID or HBA mode, BOSS or M.2 boot option, OCP networking, risers, GPU or accelerator support where applicable, cooling, PSU and warranty requirements.
asked
questions
Ask to consultant
The Servermall warranty includes:
- Access on a 24x7 basis (including holidays) to the Servermall Customer Service and Support organization for troubleshooting assistance of Servermall Refurbished Servers and Associated Goods and select software issues.
- 5 year warranty. In case of problem diagnostics or repair, we will do on the server installation site. For free.
- On-site dispatch of replacement parts to the Installation Site or other mutually agreed upon Customer’s business location approved by Servermall to address a Product problem.
Subscribe to our news and get a 50 € discount on the server.
Free shipping across EU if ordering equipment from 500 €. Delivery from 4 working days.
to buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.