DELL PowerEdge R7525 Server
You might be interested in
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
-
Condition
Refurbished
-
CPU
2×8GB DDR4 RDIMM 2133MHz
-
RAM
noHDD (up to 8 HDD 2.5'' SFF)
- Processors
- Two 2nd or 3rd Generation AMD EPYCTM Processors with up to 64 cores per processor
- Memory
- DDR4: Up to 32 x DDR4 RDIMM (2TB), LRDIMM (4TB), bandwidth up to 3200 MT/S
- Controllers
- HBA345, PERC H345, PERC H745, H840, 12Gbps SAS HBA Chipset SATA/SW RAID(S150): Yes PERC11 – H755, H755N
- Storage
- Front Bays:
Up to 24 x 2.5” with up to 24 NVMe, SAS/SATA (SSD/HDD)
Up to 12 x 3.5” SAS/SATA (HDD)
Up to 16 x 2.5” SAS/SATA (SSD/HDD)
The 24 x 2.5” SAS/SATA backplane won’t be available until April block
Rear Bays:
Up to 2 x 2.5” SAS/SATA (HDD/SSD) - Power supplies
- 800W Platinum 1400W Platinum 2400W Platinum
- Fans
- Standard/High Performance/Very High Performance Hot Plug Fans
- Dimension
- Height: 86.8mm (3.42”) Width: 434.0mm (17.09”) Depth: 736.29mm (28.99”) Weight: 36.3KG (80lb)
- Rack Units
- 2U Rack Server
- Embedded management
- iDRAC9 iDRAC RESTful API with Redfish iDRAC Direct Quick Sync 2 BLE/wireless module
- Bezel
- Optional LCD bezel or security bezel
- OpenManageTM Software
- OpenManage Enterprise OpenManage Enterprise Power Manager OpenManage Mobile
- Integrations & Connections
- OpenManage Integrations
BMC Truesight
Microsoft® System Center
RedHat® Ansible® Modules
VMware® vCenter
OpenManage Connections
IBM Tivoli® Netcool/OMNIbus
IBM Tivoli® Network Manager IP Edition
Micro Focus® Operations Manager I
Nagios® Core
Nagios® XI - Security
- Cryptographically signed firmware Secure Boot Secure Erase Silicon Root of Trust System Lockdown (requires OpenManage Enterprise) TPM 1.2/2.0, TCM 2.0 optional AMD Secure Memory Encryption (SME) AMD Secure Encrypted Virtualization (SEV)
- Integrations and Connections
- OpenManage Integrations BMC Truesight Microsoft System Center Red Hat Ansible Modules VMware vCenter and vRealize Operations Manager OpenManage Connections IBM Tivoli Netcool/OMNIbus IBM Tivoli Network Manager IP Edition Micro Focus Operations Manager Nagios Core Nagios XI
- Embedded NIC
- 2 x 1GE LOM
- Network Options
- OCP x16 Mezz 3.0
- GPU Options
- Up to three double wide 300W or six single wide 75W accelerators
Dell PowerEdge R7525 overview
Dell PowerEdge R7525 is a 2U dual-socket rack server based on 2nd or 3rd Generation AMD EPYC processors and DDR4 memory. It is designed for demanding workloads that benefit from high core density, large memory capacity, flexible I/O and 2U storage options. Compared with the single-socket R7515, the Dell R7525 server provides more compute capacity and scalability.
In the Dell PowerEdge 15G lineup, R7525 is the dual-socket AMD EPYC platform for virtualization, databases, HPC-like workloads, container platforms, software-defined storage and demanding enterprise applications. It should not be described as an Intel alternative with only a different CPU label; AMD EPYC core count, memory bandwidth and platform design are central to why this model is selected.
When to choose Dell PowerEdge R7525
Choose Dell PowerEdge R7525 when the workload needs more than a single EPYC socket can provide. This can include high-density virtualization, large container platforms, database consolidation, software-defined storage, analytics, HPC-like compute workloads and mixed enterprise environments with high CPU demand.
For virtualization, the R7525 can support a large number of VMs when RAM, storage and networking are sized correctly. For databases, it can combine high core density with memory bandwidth and low-latency storage where supported. For SDS, the 2U chassis and multiple drive layouts can be useful, but controller mode, network design and cluster-level redundancy must be planned carefully.
Compared with Dell PowerEdge R7515, the R7525 offers more compute capacity through two sockets, but it may also increase licensing and configuration complexity. For some workloads, one high-core-count socket is enough; for others, the dual-socket R7525 is the better long-term platform.
Chassis and drive bay options
The Servermall page lists Dell R7525 12LFF and Dell R7525 16SFF configurations. These represent two different storage strategies.
| Chassis option | Best for | Comment |
|---|---|---|
| Dell R7525 12LFF | Capacity-focused workloads, backup, archive and large local datasets | LFF bays are better when raw HDD capacity is more important than maximum IOPS. |
| Dell R7525 16SFF | Virtualization, databases, SDS and SSD-based enterprise workloads | SFF bays are better for performance-oriented SSD/SAS configurations and flexible disk grouping. |
Dell R7525 12LFF is useful for capacity-heavy storage, backup or large datasets. Dell R7525 16SFF is better for SSD-oriented virtualization, databases and software-defined storage. NVMe may be available in some R7525 configurations, but it must be validated for the selected backplane, controller path and exact build.
Final drive compatibility depends on the selected backplane, storage controller and exact server configuration.
Recommended Dell PowerEdge R7525 configurations by workload
| Workload | Recommended focus |
|---|---|
| High-density virtualization | Dual AMD EPYC CPUs, large RAM pool, SSD/NVMe where supported and redundant 10/25/100GbE networking as needed. |
| Databases | CPU frequency/core balance, RAM for cache, low-latency storage and controller selection matched to the database design. |
| Software-defined storage | HBA/JBOD mode, consistent drive layout, cache strategy, fast networking and failure-domain planning. |
| Container platforms | High core count, memory bandwidth, network throughput and consistent node standards. |
| HPC-like workloads | Core density, memory bandwidth, PCIe planning and validated accelerator/NIC choices if required. |
| Backup / archive | Dell R7525 12LFF, capacity HDDs, moderate compute and network throughput sized for retention policy. |
The Dell R7525 configuration should be planned as part of a workload architecture, not as a generic large server. CPU, RAM, storage and network choices must match each other.
How to choose CPU, RAM, RAID and storage
AMD EPYC platforms are often attractive when high core density, memory bandwidth and consolidation efficiency are important. In a Dell PowerEdge R7525 server, processor selection should consider whether the workload needs maximum cores, higher frequency, or a balanced combination. CPU and core count may affect software licensing for VMware, Windows Server, Microsoft SQL Server and other commercial platforms. Dual-socket systems can provide more performance headroom, but licensing must be evaluated carefully.
RAM planning is critical. Virtualization, databases and analytics can consume memory quickly, and under-sized RAM may limit performance before CPU does. Plan for active workloads, failover, maintenance and growth. For databases, RAM can reduce storage pressure by improving caching.
Hardware RAID is suitable for classic local storage deployments. HBA/JBOD mode is usually preferred for ZFS, Ceph, vSAN, Proxmox/ZFS and SDS platforms where the software layer needs direct disk control. BOSS or boot SSD options, where available, can separate OS or hypervisor boot from data drives.
For storage, Dell R7525 12LFF is capacity-oriented, while 16SFF is more performance-oriented. NVMe can provide low latency and high IOPS where supported, but confirm backplane, cabling, controller mode, cooling and serviceability.
Dell PowerEdge R7525 vs related Dell models
| Model | When to consider |
|---|---|
| Dell PowerEdge R7515 | Choose R7515 when one AMD EPYC socket provides enough compute and may simplify licensing or configuration. |
| Dell PowerEdge R650 | Choose R650 for dense 1U Intel Xeon Scalable infrastructure and standard Intel-based clusters. |
| Dell PowerEdge R750 | Use R750 as an Intel 2U comparison reference when standard Dell 2U flexibility is required. |
| Dell PowerEdge R760 | Consider R760 for newer DDR5-based Intel infrastructure, usually at a higher price point. |
Dell PowerEdge R7525 is the higher-capacity AMD 2U option. It is most relevant when the workload can use dual-socket EPYC resources effectively.
New and refurbished Dell PowerEdge R7525 servers
A refurbished Dell R7525 can be a rational production option when the hardware is tested, configured for the workload and supplied with warranty. It can be useful for virtualization expansion, database consolidation, software-defined storage and compute-heavy environments where AMD EPYC density is valuable.
New units may be preferable when procurement policy requires new hardware or when the deployment needs a precise standardized build. Servermall offers EU delivery and warranty options; depending on the offer, Dell R7525 refurbished servers may be available with a 5-year warranty. Confirm CPU generation, RAM layout, drive chassis, controller mode, networking, PSU, cooling and warranty terms before ordering.
Summary: is Dell PowerEdge R7525 the right server for your workload×
Dell PowerEdge R7525 is suitable for demanding AMD EPYC workloads: high-density virtualization, databases, software-defined storage, containers, analytics and HPC-like use cases. Choose it when dual-socket compute and 2U storage options are required. Consider R7515 for simpler single-socket consolidation, R650 or R750 for Intel-based environments, or R760 for newer DDR5 infrastructure. Before purchase, confirm CPU, RAM, storage, RAID/HBA, network, PSU, cooling and warranty requirements.
asked
questions
Ask to consultant
The Servermall warranty includes:
- Access on a 24x7 basis (including holidays) to the Servermall Customer Service and Support organization for troubleshooting assistance of Servermall Refurbished Servers and Associated Goods and select software issues.
- 5 year warranty. In case of problem diagnostics or repair, we will do on the server installation site. For free.
- On-site dispatch of replacement parts to the Installation Site or other mutually agreed upon Customer’s business location approved by Servermall to address a Product problem.
Subscribe to our news and get a 50 € discount on the server.
Free shipping across EU if ordering equipment from 500 €. Delivery from 4 working days.
to buy a servers
at Servermall
warranty
testing
We want to make sure that our equipment is fully reliable for you. That’s why all our equipment (even new) is subject to complete diagnostics, testing, and part replacement.
testing
We fully load our equipment with various utilities and software. Rest assured, it’ll work for a very long time.
Power supply
The components work at full capacity and are tested for several days. If we are not sure about something, we replace it.
of all equipment
Our regulations imply the same testing for both used and new equipment. Oh, and by the way, we complement the official manufacturer’s warranty with our own warranty.